Fastening the tape in a small profile
Posted: Sun Feb 09, 2025 6:56 am
When choosing light sources for linear lighting, there are even more options and the range is constantly expanding. Perhaps there are already new means that few people know about yet. But for now, there are three: LED strip, LED and fluorescent lamps. There is also neon lighting, but it is quite difficult to install, and it is more expensive. Therefore, kitchen lighting with neon tubes or flexible hoses is almost never done.
The strip and LEDs can be mounted simply on furniture, as it has a sticky layer. But this layer is unreliable, so they prefer to attach it somehow - with double-sided tape, staples thailand mobile database a stapler. If you plan to attach the strip directly to furniture, choose models with a high level of protection - IP44 and above. But it is better not to take those that are sealed in a tube - in home conditions they overheat (especially in the kitchen), quickly fade, and soon burn out. For this case, it is better to take types filled with varnish or another protective composition.
When choosing an LED strip to illuminate a kitchen work surface, you need to pay attention to the brightness and size of the crystals. You need to choose the largest 50*50 or 50*75, and it is better if they are located in two rows. Their total power should give no less light than determined in the calculations. Read about the types of LED strips and the rules for their installation.
You can install LED strips in special profiles (they are also called cable channels or trays). They are usually made of aluminum, have a transparent or translucent removable front panel. There may be a shelf inside, on which the strip itself is attached. These are the most convenient types, while in others you have to do something tricky.
Some types of trays for LED strips
The advantages of installing LED backlighting in such a tray are that there is no need to worry about the degree of protection of the strip, a decent appearance. The disadvantage is that the light is less bright, so the power of the crystals must be greater than the calculated one. In any case, kitchen lighting using LED strips is becoming increasingly popular. This is due to the ease of installation and low power consumption.
The strip and LEDs can be mounted simply on furniture, as it has a sticky layer. But this layer is unreliable, so they prefer to attach it somehow - with double-sided tape, staples thailand mobile database a stapler. If you plan to attach the strip directly to furniture, choose models with a high level of protection - IP44 and above. But it is better not to take those that are sealed in a tube - in home conditions they overheat (especially in the kitchen), quickly fade, and soon burn out. For this case, it is better to take types filled with varnish or another protective composition.
When choosing an LED strip to illuminate a kitchen work surface, you need to pay attention to the brightness and size of the crystals. You need to choose the largest 50*50 or 50*75, and it is better if they are located in two rows. Their total power should give no less light than determined in the calculations. Read about the types of LED strips and the rules for their installation.
You can install LED strips in special profiles (they are also called cable channels or trays). They are usually made of aluminum, have a transparent or translucent removable front panel. There may be a shelf inside, on which the strip itself is attached. These are the most convenient types, while in others you have to do something tricky.
Some types of trays for LED strips
The advantages of installing LED backlighting in such a tray are that there is no need to worry about the degree of protection of the strip, a decent appearance. The disadvantage is that the light is less bright, so the power of the crystals must be greater than the calculated one. In any case, kitchen lighting using LED strips is becoming increasingly popular. This is due to the ease of installation and low power consumption.