it is possible to make a textured roller with your own hands indonesia mobile database one of the existing methods:
1. To imitate brickwork, a foam roller serves as a base. Using a regular stationery knife, cut out indentations in the shape of bricks. In this case, it would be a mistake to cut out the bricks themselves, since after smoothing them out with a roller, they will not be convex, but simply pressed into the wall, losing the effect of realism.
2. There is no better way to reproduce a textile canvas on a wall than to use the textile itself. In this case, a simple foam roller is wrapped with a strip of rough-textured canvas and secured with threads.
3. To imitate a marble surface, a plastic roller covered with a piece of genuine leather is ideal. It is advisable to sew the leather on carelessly and with folds.
4. To give the wall surface the effect of a natural wood board, the plastic roller must be wrapped with a narrow strip of textile or covered with crushed fabric.
5. To obtain a specific pattern, it is necessary to cut it out on the surface of the roller, which plays an auxiliary role. For these purposes, a foam rubber or foam plastic roller is best suited. It should be taken into account that the foam rubber must be rigid.
In some cases, kitchen utensils, such as a rolling pin, or even massage rollers, can be used as a structural roller.
Step-by-step technique for decorative plastering of walls
Before applying decorative plaster, it is necessary to prepare the walls. In order for the plaster material to last longer and not crack, preliminary treatment of the walls is performed. To do this, the entire surface of the walls is cleaned of dirt, dust and old wallpaper, and a primer is applied on top. Then, to further level the walls, putty is applied. For thi