Advice: It is best to paint this type of structure after its assembly is complete.
Posted: Mon Feb 10, 2025 9:34 am
Most often, polystyrene foam and foam plastic are used in insulation work (see Insulating the ceiling with foam plastic in the garage: how it is done).
To install such material, you will need:
Construction adhesive.
Sealant.
Wooden planks and boards.
Perforator.
Screwdriver.
Self-tapping screws for wood.
Dowels.
Advice: To properly insulate a garage, you must initially construct a wooden frame on the surface.
Installation of polystyrene foam
Stages of work:
In this case, only high-quality wood is used, which has undergone a long drying process (natural) and good treatment with various impregnations. To enhance the effect, you can cover the wood with regular paint (oil), which will create a protective film.
The lathing is made quite simply. You can do the process yourself.
The bearing strips are mounted on the wall surface using a sri lanka mobile database drill and dowels. The auxiliary strips, which form the lathing, are attached using self-tapping screws and a screwdriver.
After such works, the process of installation of insulation is carried out. Foam plastic and polystyrene foam are solid materials and are quite easy to cut with a stationery knife.
The required size layers are inserted into the cells of the lathing, they should fit tightly into them. If this does not work, then it is necessary to use construction glue, which is applied to the surface and the inner side of the material itself.
Then the insulation is fixed to the surface. To avoid questions about how to get rid of condensation on garage doors, which are usually metal, this method of insulation is used using construction glue.
The wide use of such materials in insulation works as foam plastic or polystyrene foam is due not only to their practicality. Their price is quite affordable, and the service life of such materials is very long (10-15 years).
As soon as the lathing on the surface is ready and the insulation is in its cells, you can finish the ceiling.
Finishing is carried out using:
To install such material, you will need:
Construction adhesive.
Sealant.
Wooden planks and boards.
Perforator.
Screwdriver.
Self-tapping screws for wood.
Dowels.
Advice: To properly insulate a garage, you must initially construct a wooden frame on the surface.
Installation of polystyrene foam
Stages of work:
In this case, only high-quality wood is used, which has undergone a long drying process (natural) and good treatment with various impregnations. To enhance the effect, you can cover the wood with regular paint (oil), which will create a protective film.
The lathing is made quite simply. You can do the process yourself.
The bearing strips are mounted on the wall surface using a sri lanka mobile database drill and dowels. The auxiliary strips, which form the lathing, are attached using self-tapping screws and a screwdriver.
After such works, the process of installation of insulation is carried out. Foam plastic and polystyrene foam are solid materials and are quite easy to cut with a stationery knife.
The required size layers are inserted into the cells of the lathing, they should fit tightly into them. If this does not work, then it is necessary to use construction glue, which is applied to the surface and the inner side of the material itself.
Then the insulation is fixed to the surface. To avoid questions about how to get rid of condensation on garage doors, which are usually metal, this method of insulation is used using construction glue.
The wide use of such materials in insulation works as foam plastic or polystyrene foam is due not only to their practicality. Their price is quite affordable, and the service life of such materials is very long (10-15 years).
As soon as the lathing on the surface is ready and the insulation is in its cells, you can finish the ceiling.
Finishing is carried out using: