Clean the return tray of the cleaning machine
Posted: Wed Feb 12, 2025 10:50 am
Move the clutch release and disengagement levers to the engaged position.
Slowly move the main speed lever forward to begin cleaning.
When the crop begins to enter the threshing port, use the manual threshing depth adjustment switch to position the ear away from the depth indicator mark.
Once all crop has been harvested, move the header clutch lever to the disengaged position.
When the grain outlet stops producing grain, move the threshing unit clutch lever to the disengaged position.
Check that all the switches on the car are closed. Reduce the throttle and turn off the engine.
Drive the combine back to its storage location denmark number data and perform certain checks and maintenance.
4. How to service a combine harvester
4.1 Removing garbage
Thoroughly clean all machine components and connections, paying particular attention to cleaning the puller and removing residue from the return plate.
Clean any residue from the rollers and grates.
Be sure to clean the grain in the grain storage facility and elevators.
4.2 Full lubrication
Apply oil or petroleum jelly to each connection to prevent oxidation.
4.3 Separate storage
Some parts of the wheat harvester should be removed and stored separately.
Slowly move the main speed lever forward to begin cleaning.
When the crop begins to enter the threshing port, use the manual threshing depth adjustment switch to position the ear away from the depth indicator mark.
Once all crop has been harvested, move the header clutch lever to the disengaged position.
When the grain outlet stops producing grain, move the threshing unit clutch lever to the disengaged position.
Check that all the switches on the car are closed. Reduce the throttle and turn off the engine.
Drive the combine back to its storage location denmark number data and perform certain checks and maintenance.
4. How to service a combine harvester
4.1 Removing garbage
Thoroughly clean all machine components and connections, paying particular attention to cleaning the puller and removing residue from the return plate.
Clean any residue from the rollers and grates.
Be sure to clean the grain in the grain storage facility and elevators.
4.2 Full lubrication
Apply oil or petroleum jelly to each connection to prevent oxidation.
4.3 Separate storage
Some parts of the wheat harvester should be removed and stored separately.