As extensive as the preparatory measures are, mixing and applying the liquid

[bhasan01854]

Depending on the manufacturer, the binding agent is mixed in a large container with lukewarm water , the cotton is loosened in a plastic tub and then both are mixed well. According to the manufacturer, the mixture is then soaked for a certain amount of time.
A simple plastic trowel or roller is best for applying it to the wall or ceiling. Spraying is also possible, especially for large areas. However, as the equipment here is not particularly cheap, the spray variant is usually only suitable for professionals. When applying with a trowel, the surface can easily be smoothed out at the end with the trowel dipped in clean water. Rubbing is not necessary. Smoothing out also explains the name "seamless wallpaper", as clean transitions are possible without joints and edges, as is often the case with conventional wallpaper.

Cotton plaster is not alkaline, so it can even be algeria mobile database applied without gloves, as it does not have a dangerous corrosive effect on the skin.

During the drying time, it is important not to touch the wall so that no damage is caused to the flat surface. Good ventilation of the living space ensures accelerated drying.

It is extremely practical that small scratches can be repaired very quickly and easily. This is completely problem-free when applying the paint to the wall because of the long drying time. Later, you simply moisten the affected area a little and carefully spread the resulting paste back onto the wall.

For larger repairs, the plaster is softened and removed so that new material can then be applied without visible transitions.
General removal during subsequent renovations is carried out by soaking large areas of the wall with water. After a short time, the entire plaster can then be pushed off the wall with a spatula. It could then even be reused, provided that small particles of dirt and grime have not become mixed in.